5kgs per bottle;
20kgs per carton
20kgs per barrel
200kgs per barrel
1 - 200
201 - 1000
1001 - 2000
To be negotiated
Epoxy resin 318AB can be cured under room temperature, 3:1 weight ratio, very easy to operate, with the feature of low viscosity and good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, low viscosity.
can be widely used for arts and crafts, handmade jewelry, and mold filling, etc..
Properties before Hardening
A: B = 100:33(weight ratio)
25 ℃×8H to 10H or 55℃×1.5H (2 g)
Operation 1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used. 2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption. 3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Hardness, shore D
Withstand voltage, KV/mm
Flexural strength, Kg/mm2
Volume resistivity, Ohm3
Surface resistance, Ohmm2
Thermal conductivity, W/M.K
Induced electric loss, 1KHZ
Withstand high temperature, ℃
Moisture absorption, %
Compressive strength, Kg/ mm2
factory of 3500sqm, all the materials are offered by factory directly
All of our products has
ROHS, REACH, PAHS, ASTM, EN-71 CERTIFICATE!!!
Packaging & Shipping
FREE SAMPLE IS AVAILABLE!!!
1, Why Choose Jinhua glue?
1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly.
2) Jinhua has R&D team, we accept OEM, and small order is acceptable
3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting.
4) Jinhua with output of tons per day, ensure the fast on time delivery
5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.
2, Do Jinhua has MSDS for shipment?
Yes, we do have MSDS for shipment all all our epoxy and PU resin